6405 NSK Open Deep Groove Ball Bearing 25mm inside x 80mm outside x 21mm wide Shields Limiting Speeds (x1000rpm) Grease 8

Limiting Speeds (x1000rpm) Grease 8

enabling compensation for minor shaft misalignment and mounting inaccuracies while maintaining smooth and efficient operation

28 mm Distance outer ring from side face to snap ring groove

Bush length: 63

6405 NSK Open Deep Groove Ball Bearing 25mm inside x 80mm outside x 21mm wide Shields Limiting Speeds (x1000rpm) Grease 8NSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass